Plans & Kits

Short handed cruiser-racer

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

Construction - Glued lapstrake plywood.

Alternative construction - Traditional, cold-molded and strip plank.

No Lofting required.

Plans include 8 sheets.

Sail Area - Lug 87 sq. ft.

Sloop 104 sq. ft.

Yawl 121 sq. ft.

SAM is a pure racing boat built in composite with the sandwich technique. A prototype of this boat got a good result in World Championship of the class same years ago.

Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.

Kingston 15, A personal weekender for 2.

M80, is a simple to build plywood trailable trimaran, plans are very complete and include DXF files for CNC cutting.A standard folding system is used to faciltate trailing by road at a folded width of 2450mm.The interior consists of two wing berths 2000 x 600 a single up forward 1900 x 700 with r

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.

Minimum size ocean voyager

A perfect gift for the family's newest little boatbuilder, the CLC Cradle Boat is an ideal first stitch-and-glue project.