Plans & Kits

An easily built ,attractive, plywood pirogue/canoe.

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.

Didi Mini radius chine plywood Mini 650 racer

The Adirondack Guide Boat is known to be a fast and easy rowing boat. While it tends to be tippy, this is a result of what makes it fast, its narrow waterline. The distinct flare gives it strong secondary stability.

The lines for this canoe were taken from an original ‘Huron’ built in cedar/canvas by the Peterborough Canoe Company. It was a second grade model in a series of Cruiser canoes that measured from 16′ x 33″ to 18′ x 37″.

If you enjoy rowing and need a boat which can be built quickly, doesn’t cost much, and is easy for transportation and storage then this tiny vessel might be for you. “Mighty Mouse” is the adult version of our one sheet mini punt “Mickey Mouse”.

The Olga 28 is a trailerable power cruiser constructed with plywood and epoxy. The design was inspired by the classic power boats of the Pacific Northwest, while her construction takes advantage of modern materials to produce a lightweight, easily maintained boat.

A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.

Accomodates 2-4 for daysailing, and has a small cuddy cabin. Construction: Carvel Planked over sawn frames. Alternative construction: Strip, or strip bottom with plywood sides. Lofting is required. Plans include 7 sheets.

The project, despite its small size, develops a discrete internal volume allowing to nr. 4 crew members to spend short cruises with good speed and pleasant navigation.The hull lines and the deck are to corner for simplicity of construction, and are harmonized with the hull volume.