Plans & Kits

TRAWLER YACHT 485

This boat has a comfortable feel to it and a stability that makes kayaking in any weather comfortable.

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq. ft.

Lofting is required.

Roberts 246  

A boat to take you to all the shallow water places that most sailors never see up close (deep water places too). At only 95 lbs it is easily car topped or trailered and can even be launched from many places without a ramp.

Built by eye in the Bahamas for the last 40 years, Doug Hylan’s drawings allow for strip-planking or cold-molding.Construction: Strip-planked over laminated frames.Alternative construction: Cold-molded, plans included.Lofting is required.Plans include 6 sheets.

Rugged little launch with generous beam.

Construction features a traditional backbone of bolted-up oak, steam-bent frames and strip-planking. Four different arrangements are shown.

Construction: Strip-planked over steam-bent frames.

The cradle boat Baby Tender is an adaptation of the classic yacht tender carried aboard many of the finest yachts during the time when wooden boatbuilding was truly an art. The boat has a length of 45 in. and a beam of 22 in.

21′ Planing Skiff

“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.