Plans & Kits

ROBERTS 310

Sharpie 31.5′ EGRETL.O.A.: 31′ 6 ½″SPARRED LENGTH: 35′ 6″L.W.L.: 26′ 3″BEAM: 8′ 6″DRAFT: 1′ 2 ¼″ /4′ 8″SAIL AREA : (Depends on rig)DISP.: 5,000# (approximate, for cruising)BALLAST: 1,500 lbs. lead, inside; additional to trim as needed.

The CS-21 was inspired by the iconic Harkers Island style work boats. This center console design features the famous Carolina flare and a modified V bottom shape for a comfortable and stable ride while maintaining a spacious interior.

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p

Round-bottomed, transom stern, centerboard, 2-4 daysailing.

Contruction: Carvel planked over steamed frames

Alternative contruction: Lapstrake, strip or cold-molded

Lofting is required

Plans include 3 sheets

A double version of the popular Kingfisher, the best recreational shells for both rough and smooth water.

Construction: Plywood planking over bulkhead-type frames

No lofting is required

Plans include 4 sheets.

This 16' x 21" [4.9m x 53cm] strip planked kayak is adapted to comfort and responsiveness in active water. The nearly plumb bow and stern provide a long waterline in a compact package, allowing a good turn of speed in manageable size.

A refinement of the traditional Swampscott working dory for recreational use.

Plans include nine different rigs.

Construction: Glued lapstrake plywood over sawn frames.

Alternative construction: Traditional dory construction.

No lofting required.

Didi 23 radius chine plywood trailer-sailer

The Chesapeake Bay is home to many wonderful work boats, one of the most unique is the tiny Smith Island Crab Skiff. Our team race boat the “Twisted Oyster”, built and raced by a consortium of three friends, has been very successful.