Plans & Kits

Wood strip/epoxy plans and kits

SPHERA is a simple cruising boat, studied for the maximum ease of construction in relation to its size.

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).

Didi 34 radius chine plywood cruiser/racer

The Eureka is a pretty, simple to build plywood canoe built in stitch and glue, (44lbs down to 34) and paddles nicely. Very comprehensive plans - a boatbuilding course in a book.

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.

SAM is a pure racing boat built in composite with the sandwich technique. A prototype of this boat got a good result in World Championship of the class same years ago.

Here's a handy boat that can be rowed, sailed, and powered with up to three large adults, and it "nests" to take up less space.

The PT skiff is a very fuel efficient center console runabout that is good looking, has good handling, can carry a load, and is incredibly quick with only 20 horsepower.

Beamy yet fine-lined rowing/sailing boat designed for lightweight construction.

Construction: Cold-molded.

Lofting is optional.

Plans include 5 sheets.