Plans & Kits

Centennial Spray 38

The Headwater Fourteen [H-14] was designed and the prototype built in the Summer of 1985 to test the viability of using frameless, stressed skin construction to build a serviceable Whitewater drift boat.

Cutter designed by William Fife Jr., in 1888.The plans produce a model that is 28″ in length.You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift, as well as template for you to shape the profile.

SCHEGGIA (designed to compete in 10 Foot Class – www.diecipiedi.it) is narrow at waterline which makes it fast. Thanks to its flare sides stability increases considerably when the boat starts to hee

V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 11 sheets.Please note: gaff rig version’s mast measurements are taken by scaling from the plans.Notice the below de

Simplicity of construction, user friendliness (both for single or double) and high performance – all of this with reasonable costs. These are the main priorities which lie at the base of the DP 14’ design and which justify the main choices made, in particular:

A 10' Plywood Runabout

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.

The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry.