Plans & Kits

Didi 34 radius chine plywood cruiser/racer

A stitch and glue touring canoe design 14' x 30" [4.3 m x .76 m]

LYS stands for Lumber Yard Skiff. These rugged flat bottom work skiffs were originally designed to be built using materials readily found in most lumber yards- underlayment plywood and spruce framing.

The New Ronan is a direct inspiration from our recently released Selkie design. When we came out with the Selkie we knew her sweeping lines would draw admiring stares, and we predicted petite paddlers would love that they finally had a boat designed specifically for them.

The Hanze Yawl was designed some years ago during a course on lofting at the Bootbouwschool in the Netherlands.Bert van Baar, the owner of the school was very pleased about a Swedish design he had build previously in a project on the streets of Old Amsterdam.

The Goat has become known worldwide for being a simple to build and simple to sail that delivers.

“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).

Auxiliary cruising sloop evolving from the Hudson River and Friendship sloops.

Excellent for single handling with 450 sq. ft. of working sails, open decks and large cockpit.

Oceangoing carvel-planked cruiser with a choice of centerboard or ballast keel configurations.

Construction: Carvel planked over sawn frames.

Alternative construction: Strip.

Lofting is required.

Plans include 7 sheets.