Plans & Kits

8 plank stitch and glue canoe.

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage is available up forward below the casting deck.

Good speed and sea keeping ability with low impact & noise. 50hp outboard or inboard diesel.

Didi Mount Gay 30 radius chine plywood racer

A stitch and glue touring canoe design 14' x 30" [4.3 m x .76 m]

NEW - COASTER Trawler Yachts & Work boats Here are the first of a new range of Coastal Trawlers that can customized to suit your desires and particular requirements. All will be excellent sea boat

An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.

• Construction: Cross-planked bottom, lapstrake sides
• Alternative construction: Plywood or glued-lapstrake plywood
• Lofting is required

This design has a built-down keel to provide a deeper bilge, a centerboard housed entirely within the ballast keel, and a straight sheer.

Construction: Strip-planked over bulkhead / frames

Lofting is required.

Plans include 8 sheets.

This is my latest design for the Twopointfour metre class. An easy to build lowbudget boat ment to be competetive on the race course.

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped