Plans & Kits

16ft Plywood stitch & glue touring canoe.

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq. ft.

Lofting is required.

A thoroughly charming boat from the board of a highly respected designer, Eel exudes strength of character.

Construction: Strip, cold-molded, or carvel.

Alternative construction: Lapstrake.

Lofting required.

Plans include 4 sheets

The Milford 20 is a trailer-able shoal draft sharpie schooner modelled on the New Haven sharpies of the late 19th. century. It was inspired by Mark Fitzgerald’s FLORIDAYS design, as published in Reuel Parker’s Sharpie Book and featured in Watercraft Magazine.

Kahuna Nui is intended for extended offshore cruising and living aboard. She is available as a sailing auxiliary or as a motorsailer with an enclosed pilothouse. She has a canoe hull for ease of construction, with a full keel for strength and security while cruising.

The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.

The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry.

The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.

The Solo Quick blends efficiency, weight carrying capacity and beauty. Paddlers will find that her lean entry and minimalist profile make for a surprisingly quick and versatile hull.