If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A versatile 4-metre open utility / runabout for river and inland lake use, built in taped-seam plywood.
The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a car.
Janus is a 4 berth trailable sailing catamaran built in sheet plywood. However, don’t be deceived by Janus’ simple dory shaped hulls (which make it a very easy boat to build). It has a lot of internal room for its length and a surprisingly good performance.
We are proud to introduce Li’l Longship, the latest addition to our extensive cradle boat fleet. Designed in the spirit of the classic Viking Longship, her sweeping lines and imposing figureheads embody the spirit of adventure and exploration when Norse sailors ruled the waterways of Europe.
With an overall length of 27 feet this lovely cruiser accommodates up to four passengers comfortably. Room in the head for bunks and a working galley. Great live in boat as well as a weekend cruiser depending on your own personal adventure needs!
- Trawler Yachts & Work Boats
Glued-lap plywood rowing or sailing tender with plenty of capacity. Construction: Glued lapstrake plywood. No lofting required. Plans include 5 sheets.
Austral’s design is an outgrowth of my 26' Wynfall design, intended to provide additional space below decks, including standing headroom. She is slightly heavier, longer and wider, and has more freeboard than her smaller sister.
The Boat BW is a trailerable plywood stitch-and-glue skiff. The outboard-powered modified-vee hull with lifting strakes provides an efficient hull that rises on to plane with little-to-no porpoising. The below-deck bulkheaded and sealed compartments provide superb secondary flotation.
A small river ferry has been designed to transfer up to 60 passengers.
The design is a catamaran of marine plywood construction using fibreglass/epoxy to connect the seems.
The design is using the torqeedo electric motor concept using power dense lithium ion batteries.
I bought the boat in 2012 from the original builder in Fairfield, Connecticut.
Custom built at Madisonville Maritime Museum. 2019 19' magic tilt galvanized trailer.
Custom row boat built by Brooks Boats in Mt. Desert, Maine.
El Toro one design in nice shape. Go sailing or refinish for a showpiece.
