This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here.
(All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Shearwater 17 made with wooden deck fittings, internal hatch hold downs, and skeg from Superior Kayaks, with custon made wooden control box and lever.
Kwei U, of Mill Valley, California, had built model boats and airplanes for 50 years before deciding to build a full-sized boat.
This 1922 17' Old Town canoe was restored by Dave Millikan of Inverness, FL. It is Model HW, Grade CS, Serial No. 67358, and had been delivered to Abraham and Strauss back in 1922. Dave found it in storage in the Adirondacks in 2001.
Dylan Wallace uses this board everyday on the beaches of Nantucket. Since building this one, he and his father have finished 5 more. The board is made out of butternut wood covered with epoxy. It took 100 hours to complete. It is a David Tettledon design, with a length of 9'6".
The Covid summer of 2020 was a time of distress and dislocation for many. For New Yorker Lorne Swarthout it was also an opportunity to build a boat in his friend’s garage/workshop in Southwest Harbor, Maine. The project was a Great Auk 14 from Chesapeake Light Craft.
MINNIE is a modified David Stimson Ocean Pointer launched in July 2014. She was built over a period of 10-years, with many starts and stops due to other commitments. The modifications include stringers and engine beds, a 10.5″ deep keel and a different design for the center console.
Glen L. Design, 16′ Tug Along of Gig Harbor, WA, USA.Maiden voyage July 2nd, 2020.For his second wooden boat build, Stewart Nelson, chose this stitch and glue vessel because it’s compact design was ideal for towing and V berth spacious enough for overnight stays.
Nat Herreschoff COQUINA launched July 2017. Plans from Doug Hylan. 6 mm. glued lapstrake construction.
Shown minutes before launching with full rig in place.
Doug Robertson named this canoe BOING for the noise it will make if all the strips come apart. It is a modified Bear Mountain Rob Roy Canoe. The 13' design was shortened to 11' 6". It weighs 26 pounds. Doug used cedar bead and cove strips covered on the outside with 5 oz fiberglass.
I recently sent this letter to Jeff Spira or www.spirainternational.com to express my appreciation for providing plans on his 20ft Carolina Hatters V Hull dory that my father and I spent the last 9 months building...the boat is built better than mos
With a submerged clipper bow and high tucked transom, Kayleigh is every inch a classic powe
Lapstrake, Atlantic white cedar, oak ribs, mahogany thwarts transom, ceder floor boards, spruce m
Mike died before he could complete the boat. Cold-molded, 90% complete.
