TAIGA WILDERNESS TRIPPER CANOE
John Paul Burke grew up playing with friends Bob, Tony, and Linnie Streit. Now he has built a boat for the parents of his childhood friends, Rob and Charlie Streit.
This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here. (All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
John Paul Burke grew up playing with friends Bob, Tony, and Linnie Streit. Now he has built a boat for the parents of his childhood friends, Rob and Charlie Streit.
This boat has tight grain douglas fir stringers with local white ash ribs and was a home build.
Skin is 9 ounce dacron, coated with 2 part skinboat polyurethane.
Utilizes 5.2 square m windsurf sail on unstayed carbon windsurf mast.
Here floats RED RYDER in a swimming pool with her builder, Rip Graham of St. Simons Island, Georgia, aboard. His wife Charlotte took the pictures and shared Rip’s project with us. Rip built modified version of Tom Yost’s Nikumi design for a 17′ x 22″ Aluetian Baidarka touring kayak.
Inspired by Philip Rhodes’ Bantam and Uffa Fox’s Jolly Boat, Corsair has a Suicide sail plan with a wishbone boom. The current mainsail was donated from Suicide #8, Joker. The underbody of the boat has a fine, deep entry with a long flat run which should plane easily.
This Lawton Yacht tender was built by Michael Strong in L’Etete New Brunswick over the winter months. She is planked with 3/8 inch cedar over ash frames, and fastened with copper rivets. Guards, wales and transom are made of white ash. With two rowing stations, she is able and seaworthy.
Kelsey Johnson built “Knute” over the course of a year and a half. Carpenter by trade and a first time boat builder. It was made of white oak for the frames, mahogany for comings and trim, marine grade plywood for hull. This is a Glen L15 design. The mast and boom is douglas fir.
Here’s my recently completed Herreshoff Biscayne Bay 14 built from a WoodenBoat plan. I read the construction article in WB issues 96-98 back in 1990-91 and loved the look of this boat. Made a few minor changes to the plan and outfitted the boat using all antique or replica hardware.
JUBY is a Shellback Dinghy made at WoodenBoat School and finished at home in North Carolina. It has won awards at the N.C Wooden Boat Show and the Cape Fear C.C Wooden Boat Shows. The Shellback can be sailed, rowed or sculled. It also makes for an excellent tender.
The Sinne 610 is an expedition rowing boat designed by Ruud Van Veelen and built by Walter Baron of Old Wharf Dory Co. This is the second boat built to these lines, and the first in North America. It is fully decked, with lots of covered storage.
This 16' x 21" [4.9m x 53cm] strip planked kayak is adapted to comfort and responsiveness in acti
This 17' x 20" [5.2m x49cm] strip planked kayak is designed for comfort and speed in rough water.
Relaunched: Phil Bolger designed Gloucester Light Dory built in 1987 by David Bush guided b
“LONE STAR” is a world cruising yacht designed by Naval Architect Jay E. Paris Jr.