Launchings

14′ SUP built from a kit from Fiberglass Supply for cruising around the San Juan Islands in Washington State.

Completed Chester Yawl, from plans at Chesapeake Light Craft. This is a working boat, intended for rowing by one or two on lake Erie. It has a work boat finish. The gravel beaches on this part of Lake Erie are very hard on the finish.

RIVER PRINCESS was launched in June 2004. Builder and owner Rodney Collard writes "This design was drafted on paper from photographs from WoodenBoat magazine. We read up on stitch-and-glue construction.

Jeff Spira of Spira International wrote, "Gabriele Di Marzio of Abruzzo, Italy built this 14' dory with his two sons. The modified Spira Juneau Grand Banks dory design was built with hardwood frames and covered with 5 mm beech plywood on the sides and 10 mm on the bottom.

Stretched version of Caledonian Yawl (with approval of the designer Iain Oughtred stretched by 2'6")

Launched in October of 2001, Tom Shives sails this San Francisco Bay Pelican in the waters of Puget Sound. With a length of 12', and beam of 6', WET DOG is designed by Captain William Short of Larkspur, CA. Tom is seen here at the tiller with his crewman, Skip Kratzer.

Tim Allen built this 7' pram from a design by Glen-L Boats of Bellflower, CA. Named CROW'S NEST, he intended her as a sailing pram using leeboards. He found that it only sails downwind and capsizes easily, so Tim bought a 2hp Honda motor to replace the sailing rig.

The Mebo 12 is a new versatile nesting dinghy I designed and built last winter and spring.

Eric Weissberger and Scott Lloyd built this Karl Stambaugh–designed weekend skiff in somewhat more than that weekend, actually it was more than a year.  VERBOATEN was built from the plans using stitch-and-glue methods on okoume plywood, and then giving the hull 3 coats of epoxy.  Eric plans to us

Rod Wright’s version of the Barto 16′ melonseed (WB plan#120). She’s built of spanish cedar, sipo, ash and white oak; and sports a sail sewn 13from a Sailrite kit.