SHARPIE
Richard Goy of Brothers' Boatworks writes, "The boat is constructed of marine plywood and coated with fiberglass cloth and epoxy resin. It is powered by a 70 lb. thrust-modified Minn-Kota electric motor mounted under the rear deck.
This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here.
(All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Richard Goy of Brothers' Boatworks writes, "The boat is constructed of marine plywood and coated with fiberglass cloth and epoxy resin. It is powered by a 70 lb. thrust-modified Minn-Kota electric motor mounted under the rear deck.
John Parrish built this Tandem Annapolis Wherry from a kit by Chesapeake Light Craft. He writes that at 19′10″, it is 3′ longer than the one-man version of the same boat, and that it was the first one that CLC put into kit form.
The Ruudi V is a Savo 575 , a Finnish racing rowboat designed by Ruud Van Veelen. It's a very fast single with a sliding seat, non-feathering oars, and very light weight .
Marc Ornstein designed and built this boat for interpretive freestyle paddling and often paddles it with the boat heeled all the way to the gunwales. It is a 13' long solo sport canoe weighing 29 pounds.
Victor DiNovi writes "KELEKA is a four-person outrigger canoe made in the Hawaiian tradition. She is strip-planked in Philippine mahogany with 10 oz. glass covering, and carbon fiber unidirectional diagonals on the interior for longitudinal stiffness.
Keith Telfer writes "A group of seven volunteers from Wellspring Cancer Support Center, both cancer patients and caregivers, built this canoe in ten weeks. We built it for a charity auction to raise money for the Center.
Tim White of the Maritime Aquarium in Norwalk, Connecticut, writes, that this boat was part of classes run at the boatshop and started in September 2001. We used the original one page drawing obtained from Mystic Seaport of the Cape Anne Dory dated 1939.
Paul Newman of Melbourne, Australia, just built a Wood Duck 12 Kayak from a Chesapeake Light Craft kit. He spent about 12 months on the stitch-and-glue plywood construction. The finished 12' boat weighs just 40 lbs. Paul will paddle his Wood Duck on the many waterways of his state of Victoria.
5 new canoes hit the water in Pender Harbour last weekend as part of the 12th annual April Tools Wooden Boat Challenge. Built by students at Pender Harbour Secondary, they were raced around a course in the harbour in pursuit of fame and fortune.
Stretched version of Caledonian Yawl (with approval of the designer Iain Oughtred stretched by 2'6")
International Penguin
2008 Bristol Seacraft Penguin
11'5" LOA
13' "Melonseed" daysailer. Okume marine plywood with fiberglass/epoxy skin. Home built 2023.