KINGFISHER CANOE
Rob Richard sent these photos, taken by Ray Forbes, of a Kingfisher canoe built at WoodenBoat School during the summer of 2003.
This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here. (All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Rob Richard sent these photos, taken by Ray Forbes, of a Kingfisher canoe built at WoodenBoat School during the summer of 2003.
Steve Batiste found the plans for this 'Corky' design on the website http://hometown.aol.com/polytarp/corky.htm . The article includes no citation to the builder or the designer.
This Didi 23 was built over the course of 2 years and 4 months. She was launched in October of 2022. She has a couple of modifications from the original design. First, I added a sugar scoop transom, extending her length by 20 inches.
I built her in Hamina at Etelä-Kymenlaakso Vocational College (Ekami) for scholarly thesis during October 2012- May 2013. The boat was built from a half-model. The half-model was found in 1912 at Sommers.
Gene and Luanna Dykens of Holland, MI launched a 16' wooden canoe with a Polynesian outrigger on April 25, 2003 in Long Lake, MI. Besides paddle propulsion, the boat is also equipped with a small electric motor.
15′6″ Cottage cruiser. Local red cedar, cherry and white oak. Hand woven cane seats.
Scotland Island, on Pittwater, a large body of water about 30 miles north of Sydney, Australia, is the home port of this 20' Oxford rowing shell designed by Chesapeake Light Craft.
Martin Houston designed and built this mini-tugboat, JANI J, that he named for his wife, Janice Jeanette. The two of them built her over five years at their home in South Dakota, epoxying plywood onto fir frames, then covered with fiberglass cloth.
Ken Foote built TRUANT using Edwin Monk's book How to Build Wooden Boats. TRUANT is a 12'6" catboat with 5'beam. He launched her in September of 2002. He used poplar for the bottom and sides, cypress and cottonwood for the trim.
Manasek was traditional construction - in old times used by Scouts in Czech republic. It was easy to build — just from three wide boards. It was paddled by double blade paddle.
“CHARM” is an 85′ LOA schooner originally designed to be a personal yacht that was built and fini
Built in 1933 as a commercial NC “sink netter”, “Sylvia II” has been totally restored and rebuilt
William Shaw design, 24' Yawl with shoal keel and centerboard, built 1958 in Denmark.