Lumber Yard Skiffs
Rugged, simple, stable, and economical to build, the Lumber Yard skiffs are based on traditional New England flat bottom work skiffs.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Rugged, simple, stable, and economical to build, the Lumber Yard skiffs are based on traditional New England flat bottom work skiffs.
Everyone from Louisiana seems to remember that cypress pirogue boat Pawpaw kept in his barn. Cypress pirogues have since become a relic of the past. Pirogues are flat bottom boats designed to paddle shallow swamps and marshes.
The Hanze Yawl was designed some years ago during a course on lofting at the Bootbouwschool in the Netherlands.Bert van Baar, the owner of the school was very pleased about a Swedish design he had build previously in a project on the streets of Old Amsterdam.
NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.
We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders.
Round-bottomed, carvel-planked powerboat with two berths and a single 300-hp engine.
Construction: Carvel planked over steamed frames.
Alternative construction: Strip or cold-molded
Lofting is required.
Plans include 5 sheets.
“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).
SF Pelican 12 foot: Three sheets of drawings, step-by-step building instructions, sail plans, lists for materials and hardware, and sailing handling information.
Note: Drawing plans come in pdf format and can be printed to full hard copy format.
The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
A stable (28 1/2″ beam) strip-built touring kayak.
Planked up with 1/4″ cedar strips.
Construction: Strip planked.
Lofting is required.
Plans include 4 sheets.
“CHARM” is an 85′ LOA schooner originally designed to be a personal yacht that was built and fini
Built in 1933 as a commercial NC “sink netter”, “Sylvia II” has been totally restored and rebuilt
William Shaw design, 24' Yawl with shoal keel and centerboard, built 1958 in Denmark.