Oar / Paddle
Shearwater 14 Hybrid
The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
The CS25 is an offshore boat based on the Carolina Sport Fishing boats lines.
Kahuna is a superb coastal and long-distance cruising boat, designed for modern wood/epoxy construction. The first boat was built in Australia, and several have been launched in the US. Others are under construction — in the US (New York) and in Europe (Italy, the UK and Russia).
M80, is a simple to build plywood trailable trimaran, plans are very complete and include DXF files for CNC cutting.A standard folding system is used to faciltate trailing by road at a folded width of 2450mm.The interior consists of two wing berths 2000 x 600 a single up forward 1900 x 700 with r
The True North XPD Expedition brings the thrilling performance and graceful styling of the Endeavour 17 to the big or tall paddler.
A Visayan sailing outrigger of Sulu sea, Philippines. An ancient but complex watercraft that is ubiquitous to this island nation. Sailing the exotic patriarch of multihull tribe is a different adventure that you would like to do.
A stitch and glue touring canoe design 14' x 30" [4.3 m x .76 m]
This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.
This dinghy could be considered a big little boat.
She has a lot of excellent qualities: excellent rowing and sailing ability, easy construction, and mannerly towing habits.
Construction: Glued-lapstrake plywood.
Alternative Construction: Traditional lapstrake.
Built in Denmark (1930s-40s ?) Eric Salander design. Restoration Project.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.