Oar / Paddle
22'4" Dragonfly
The boat is nice to row - a good combination of tippy enough for an intermediate, yet after a few days a novice will get the hang of it.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The boat is nice to row - a good combination of tippy enough for an intermediate, yet after a few days a novice will get the hang of it.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.
Her 6′ 11″ beam makes for a big 15-footer. Cold-molded, lightweight and trailerable. Construction: Cold-molded. Alternative construction: Carvel, lapstrake or strip. No lofting is required. Plans include 6 sheets.
Please note: this design was formerly known as Pike.
Construction - Glue-lap-plywood flat bottom.
Alternative construction - Traditional plank.
No Lofting required.
Plans include 3 sheets with instructions.
Sail Area - Sprit 60 sq. ft.
This is a simple 8ft stitch and glue sail/row pram. It requires only 3 sheets of marine plywood and should be very fast, easy, and inexpensive to build. It should end up just over 80lb so easy to transport as well.
Speed, good looks, and comfortable seating were the designer's main criteria for this double-ended centerboard daysailer.
Construction: Cold-molded over strip-planked inner skin.
Alternative construction: Strip, carvel planked (transom stern).
Lofting is required.
The Shearwater is an eye-catching, light and fast cruiser that does many things well. It is a strong contender for the budget-minded paddler looking to answer the 'if I could only have one kayak' need
Prospector “Ranger” 15 — a pocket-sized prospector.The Prospector models built by the Chestnut Canoe Company were made in lengths from 12 to 18 ft.
The CS-18 is an open interior design with the home builder in mind. It is designed for an above deck fuel tank and less aggressive flare in the bow. These features make this design an easier and faster build and at 18.5′, it will fit in most home garages.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.