Plans & Kits

Cruiser/Racer boat.

DRIADE is a light and fast rowing boat, ideal for those who wish to train for rowing with a simpler, easier to handle and cheaper boat than the typical rowing skiff.

V-bottomed single shell with sliding seat, outriggers and light plywood construction.

Construction: Plywood planking over bulkhead-type frames.

No lofting is required.

Plans include 4 sheets.

MOTH, designed according to the rules of the Classic Moth Class, is a fast and enjoyable boat. It has a narrow hull, designed so as to minimize wet surface, is relatively stable and planes easily.

This boat, with a LOA of 8 mt,develops an internal volume such as to allow 6 crew members a sailing cruise.The hull lines and deck lines are to corner for simplicity of construction, and are harmonized with the hull volume.

Janus is a 4 berth trailable sailing catamaran built in sheet plywood. However, don’t be deceived by Janus’ simple dory shaped hulls (which make it a very easy boat to build). It has a lot of internal room for its length and a surprisingly good performance.

“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.

Classic sport fishing boat in the style of the Abaco boats. A classic, smooth riding, variable deadrise hull finishing with 17 degrees deadrise at the transom.

Modern and efficient, the Freedom 17 is a fast responsive tripping canoe that's also easy to build.

Beamy yet fine-lined rowing/sailing boat designed for lightweight construction.

Construction: Cold-molded.

Lofting is optional.

Plans include 5 sheets.