Plans & Kits

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise.

Beamy yet fine-lined rowing/sailing boat designed for lightweight construction.

Construction: Cold-molded.

Lofting is optional.

Plans include 5 sheets.

24′ Chesapeake Bay Hampton FlattieL.O.A.: 24′ 2″L.W.L.: 22′ 8″Beam: 7′ 9″ Draft: 2′ ½″/3′ 9″Sail Area: 263 sq ftWeight: 2,500# (approx)Proportionately, this is the largest sharpie type known, and shows the maximum beam ratio successfully used in the sharpie type.

“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).

The i550 is a very popular 18 foot stitch and glue design. Simple construction and avid builder blogs and websites add a sense of community and support for the builder.

EURO 2150  MOTOR YACHT ... There are several accommodation arrangements possible for this design.

The Boat BW is a trailerable plywood stitch-and-glue skiff. The outboard-powered modified-vee hull with lifting strakes provides an efficient hull that rises on to plane with little-to-no porpoising. The below-deck bulkheaded and sealed compartments provide superb secondary flotation.

The Nomad is long, sleek, easy to plank and easier to paddle.

Swansea Pilot Schooner, flush-decked cruiser, based on the earliest type (late 18th/early 19th century). This vessel is intended for open ocean cruising.