Plans & Kits

A 15' Inboard Plywood Powerboat

Fast / Lightweight / Easy-to-BuildSpecifications:

• LOA 15′ 6″
• LWL 14′ 9″
• Beam 5′
• Draft (board up/down) 4″/36″
• Depth amidships 20″
• Sail Area 105 (lug) 14 sf (sprit)

Our best seller the 13 1/2 foot Bullet by Switzer. Iconic lines, the Bullet was a marathon and record breaker in its time.

For those beautiful days out for lunch on the river or an evening on the lake by yourself, this is the boat.

Tom Cat is a shoal draft catboat of plank-on-frame construction, but strip construction would do as well.

Lofting is required.

Sail area is 120 sq. ft.

Plan includes 9 sheets.

‘Volare’ comes in two versions. This is the console version, the utility version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).

With her 28″ beam, substantial flare, and sweetly shaped ends, she loves rough water. Her plywood hull is one of the prettiest we’ve seen.Construction: Plywood over web frames. Lofting is required.Plans include 4 sheets.

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage is available up forward below the casting deck.

Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.

Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.You’ll notice the different stem patterns on plans page 5...