ADVERTISEMENT

Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Shellback Sailing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

NAVCAT RIVER FERRY

Designer: 
Naviculus
Skill Level to Build: 
medium

A small river ferry has been designed to transfer up to 60 passengers.

The design is a catamaran of marine plywood construction using fibreglass/epoxy to connect the seems.

The design is using the torqeedo electric motor concept...

EURO 1200

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS.

EURO 1200 - Aft Cockpit version STEEL KIT or PLANS & CUTTING FILES or FIBERGLASS or WOOD EPOXY PLANS & FSP Based on the Waverunner 38....Hundreds already built.

Yankee Tender

Designer: 
WoodenBoat
Skill Level to Build: 
Basic

Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.

Alden 18' O Boat

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.

Construction Method: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans...

Kalostyn

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Kalostyn was designed as the subject matter of a book that I had planned to write called, How to design a boat using SketchUp 3D software.

I created a design that had lots of curves in order to demonstrate how to put these...

Jericho Bay Lobster Skiff

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Designed by Joel White, the original boat was built plank-on-frame by Jimmy Steele (of Peapod fame), but no plans were ever drawn-until now.

Tom Hill and Eric Dow have taken lines off the original boat and Tom built the prototype and has...

Talon 16' by Anders Boats

Designer: 
Tim Anders
Skill Level to Build: 
Amateur

This 16 Talon is designed to give you more boat for less dollars! You will smile zooming over choppy waters with its smooth riding hull.

All simple stitch and glue techniques make this plans build boat fun and easy to construct. Its...