Plans & Kits

Didi 34 radius chine plywood cruiser/racer

The TX18 is an inverted vee boat, Hickman sled type designed for fishing the flats along the Gulf of Mexico or anywhere a shallow draft boat must go long distance in choppy seas.

ALBATROS 26’ is the smallest sister of the ALBATROS family, our modern classic yachts. Far its size it cannot be defined a “blue water yacht” but it is a seaworthy boat.

The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.

This is an ultra efficient, modern folding trimaran design with advanced features not found elsewhere.

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.

Janus is a 4 berth trailable sailing catamaran built in sheet plywood. However, don’t be deceived by Janus’ simple dory shaped hulls (which make it a very easy boat to build). It has a lot of internal room for its length and a surprisingly good performance.

Concept: The CCSF25 is a high performance offshore fishing and family boat, she has a classic running surface of 24 degree deadrise and 8.5' max beam. Wide chine flats for knocking down spray, integrated lifting strakes for high speed handling and directional control.

A 15' Inboard Plywood Powerboat