Plans & Kits

Roberts 434 Wood Epoxy Sailboat

The classical hull shape of old wooden runabouts of the 70’s combines perfectly well with the use of marine plywood. This allows SILVER 55 to be in the same time elegant and simple to build.

This 20′ cutter will prove challenging to build, but will reward your efforts with incomparable charm and grace.Atkin specifies traditional plank-on-frame construction.Construction: Carvel-planked over steamed frames.Alternative construction: Cold-molded or strip.Lofting is require.Plans include

Flat-bottomed rowing skiff elegant enough for a yacht tender.

Construction: Cross-planked bottom, lapstrake sides

No lofting is required

Plans include 1 sheet.

Wood strip/epoxy plans and kits

This is a boat simple to build, economical to use and that has a minimum of habitability and a lot of deck space for outdoor living.The construction method is the “stitch and paste” because of its small size.The hull is in CPM 10 mm thk.

Light displacement boat, that resume classic water lines into a modern conception.

A boat to take you to all the shallow water places that most sailors never see up close (deep water places too). At only 95 lbs it is easily car topped or trailered and can even be launched from many places without a ramp.

A perfect gift for the family's newest little boatbuilder, the CLC Cradle Boat is an ideal first stitch-and-glue project.

Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.