Plans & Kits

Outboard motor workboat for 8 to 30 hp Shallow draft, high capacity, simple build.

Lively, fast, planing racer/daysailer. Construction: Double-diagonal planking over steamed frames. Alternative construction: Cold-molded. Lofting is required. Plans include 4 sheets.

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.

The Eureka is a pretty, simple to build plywood canoe built in stitch and glue, (44lbs down to 34) and paddles nicely. Very comprehensive plans - a boatbuilding course in a book.

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.

An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake, strip, or cold-molded

Lofting is required

Plans include 3 sheets.

This is a fast easy, light weight, modern bass boat. It is small by today's comercial standards but has all the modern features.

• Big flat casting decks
• Intergrated live bait tank
• Internal rod storage
• Removeble fuel tank
• High freeboard

The Lorna has a slim sweet hull for experienced paddlers.

16ft Plywood stitch & glue touring canoe.

The FireBug is a small sailboat or yacht that you can amateur build at home, sailing club or school, then learn to sail. It's easy to sail and will be the fastest boat on the bay. Low cost too!