Plans & Kits

Didi 40cr radius chine plywood cruiser/racer

MASH is a design I created for Woodenboat Magazine’s Sketchbook article, issue 275, July/August 2020. She is a 24ft power cruiser with a cuddy cabin designed in the lobsterboat style.

Feel the difference a proportionally correct sized kayak can make in your paddling enjoyment.

Techne is a pure double trapeze skiff, fast, exciting and for amateur boat building.

In the winter of 2012 a very good friend leant me an old copy of Nautical Quarterly. An article about Catboats caught my attention — I was and still am taken by their beautiful lines.I decided to design one with the aim of building it in the summer.

Swansea Pilot Schooner, flush-decked cruiser, based on the earliest type (late 18th/early 19th century). This vessel is intended for open ocean cruising.

Based loosely on the Folkboat, this plywood lapstrake double-ender combines comforting rough-water ability, and good looks.

Construction: Lapstrake plywood over laminated frames.

Alternative construction: Traditional plank on frame, strip or cold-molded.

Tandem Row & Sail | CartoppableSpecifications:

• Overall Length 14′ 4″
• Waterline Length 10′ 10″
• Beam 48 1/2″
• Draft (board up/down) 5"/27″
• Depth amidships 14 3/4″
• Bare hull weight 115 lbs

Derived from traditional Norwegian small craft, this handsome double-ender performs as well as a daysailer and beach cruiser.

Clean, frameless, glued-lapstrake plywood hull means, easy construction, happy trailering, and low maintenance.

Construction: Glued lapstrake plywood.

The input was “design a pure cruising boat”.The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.The hull lines have been developed both to corner and round.We wanted to realize something new for deck design.