Plans & Kits

A 10' Plywood Runabout

The CS-18 is an open interior design with the home builder in mind. It is designed for an above deck fuel tank and less aggressive flare in the bow. These features make this design an easier and faster build and at 18.5′, it will fit in most home garages.

Elegant, high-performance, sliding-seat pulling boat designed to mitigate the speed-robbing pitching associated with some sliding-seat craft.
Construction: Lapstrake planked over steamed frames.
Alternative construction: Cold-molded, strip or glued lapstrake.

Meghan has a constant deadrise V-bottom hull with  a capacity of 1-2 passengers and features for & aft flotation chambers. Her rig consists of a 16ft free standing mast, 9′5″ wishbone boom and 65 square ft sail.

BABY BAGGIE is quite long and difficult to build for its size (10 Foot) but has been designed mainly to satisfy the desire of having a small elegant boat.

Didi Mini radius chine plywood Mini 650 racer

Janus is a 4 berth trailable sailing catamaran built in sheet plywood. However, don’t be deceived by Janus’ simple dory shaped hulls (which make it a very easy boat to build). It has a lot of internal room for its length and a surprisingly good performance.

NEW - COASTER Trawler Yachts & Work boats Here are the first of a new range of Coastal Trawlers that can customized to suit your desires and particular requirements. All will be excellent sea boat

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.

DragonFlyer 3.2 is a great boat for all ages to build. We built the first boat, Zip, with our four kids, then aged seven to twelve and they all had a great time and learned along the way.