If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Classic sport fishing boat in the style of the Abaco boats. A classic, smooth riding, variable deadrise hull finishing with 17 degrees deadrise at the transom.
Roberts 25 trailerable cruising sailboat you can build in wood epoxy using the plans and full size frame patterns.
A perfect gift for the family's newest little boatbuilder, the CLC Cradle Boat is an ideal first stitch-and-glue project.
Spray 52 is available as a Wood / Epoxy plan and full size frame patterns.
This 24' Australian design provides three arrangements to choose from-a small cuddy, or two cabin styles.
Construction is plywood with a single hard-chine.
Construction: Plywood planking over sawn frames.
Alternative construction: Strip.
Lofting is required.
Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.
THALAS 13' draws inspiration from the Whitehall, the most classical American row boat of the XIX century but, thanks to the modern construction techniques, is much lighter and has different hull lines
Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of Hal Kelly.Mia
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
1938 Hinkley Islander Sparkman & Stephen’s design.
CHANTEY II - Douglas Fir Strip Planking, West System Epoxy construction. 51' overall.
Two FREE Boats ready to go.
Looking for good homes.
Includes sailing rig, Shaw & Tenney Oars, winter cover and trailer.
