Plans & Kits

kid sailing skiff

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

Round-bottomed, carvel-planked powerboat with two berths and a single 300-hp engine.

Construction: Carvel planked over steamed frames.

Alternative construction: Strip or cold-molded

Lofting is required.

Plans include 5 sheets.

Didi 23 radius chine plywood trailer-sailer

The Wineglass Wherry possesses the wineglass transom and smooth double-ended waterline of a classic rowing boat. A versatile craft, that's easy to build, lightweight (90 lbs) and rugged.

This V-bottomed daysailer can be shallow or deep drafted and is easily sailed.

Construction: Batten-seam planking over steamed frames

Alternative construction: Plywood

Lofting is optional.

Plans include 6 sheets.

4.80 m Plywood stitch & glue touring canoe. Only two plywood sheets are needed!

A boat to take you to all the shallow water places that most sailors never see up close (deep water places too). At only 95 lbs it is easily car topped or trailered and can even be launched from many places without a ramp.

Bow and stern of English traditional narrowboat. Cutting files to produce a kit of steel parts for assembly. The midsection is a parralel box that can vary between 20 and 40ft. The midsection is produced by folding steel plate then adding the bow and stern.

Light, elegant double-paddle canoe for glued-seam lapstrake construction.Can be built 12′, 13′ 7″, or 15′ 2″ from the same set of plans.Construction: Glued lapstrake plywood.Alternative construction: Traditional lapstrake, cold-molded or strip.No lofting required.Plans include 5 sheets.