If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Rice Lake Skiff is sure to be a very useful boat at the cottage for fishing, rowing or just knocking about.
20' expedition size, double kayak, accommodates big people with big feet in an efficiently paddled hull.
“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).
Carvel-planked, outside ballasted cruiser with choice of three or four berths.
Construction: Carvel planked over steamed frames
Alternative construction: Cold-molded or strip
Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq. ft.
Lofting is required.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.
NAIADE is a little bit shorter than classical sea kayaks but it is perfectly suitable for pleasure trips in calm waters, under safe conditions, even for amateur paddlers.
Small blue water cruiser with Junk rig, inside steering station, and accommodation for up to four persons.
Suitable for home boatbuilders, all wood construction, lead ballast cast in small pigs.
Glued-lap plywood rowing or sailing tender with plenty of capacity.
Construction: Glued lapstrake plywood.
No lofting required.
Plans include 8 sheets.
We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise.
Our Talon Series boats are designed to handle good seas with speed and comfort. We use a 30 degree dead rise found on production speed boats to make a soft ride.
Start Building ... Get Floating!!
Located in Mystic, Connecticut
- 3 staterooms and salon with A/C units, sleeps 8
Beautiful boat once restored (2016) Unfortunately neglected since.
Thames River racing skiff converted to expedition style rowing boat. Built 1900-1918 by E.
