Oar / Paddle
The Open Boat
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
The Shearwater is an eye-catching, light and fast cruiser that does many things well. It is a strong contender for the budget-minded paddler looking to answer the 'if I could only have one kayak' need
Didi Mount Gay 30 radius chine plywood racer
This is a centerboard cruising boat for couples and small families. Lightweight and strong, it can be easily hauled with a trailer. Construction: Plywood topsides over bulkheads and stringers; strip planked bottom Lofting is required. Plans include 6 sheets.
Accomodates 2-4 for daysailing, and has a small cuddy cabin. Construction: Carvel Planked over sawn frames. Alternative construction: Strip, or strip bottom with plywood sides. Lofting is required. Plans include 7 sheets.
Easy to Build Flat Bottom Skiff 18 ft Instructions also Include Our 14 Ft Smaller Version
A narrow beam and shallow arch hull make the Canadien ideal for general-purpose paddling and light tripping.
Come experience the nuances of this East Greenland design.
The Ammassalik 176 is a true representations of the East Greenland design.
Based on Tom Gillmer and Iver Franzen’s New Moon (an enlargement on Gillmer’s Blue Moon), this sailing vessel is intended to be a stout, seaworthy, offshore-capable passagemaker, with an emphasis on the balance between comfortable sea-keeping and good sailing abilities.
Rugged, simple, stable, and economical to build, the Lumber Yard skiffs are based on traditional New England flat bottom work skiffs.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).