Plans & Kits

Here is another little skiff inspired by a Chesapeake Bay working craft.

Resembling her 8′ cousin more than the sleeker 12′ Acorn, this chunky dinghy will be a good load carrier for her length—and she looks very, very British.Oughtred saves you from guess work by showing precisely how her planking should be lined off.Construction: Glued lapstrake plywood.Alternative c

The plans and construction manual for the plywood International 110 are available to any class member for use to build new or rebuild and restore an older boat.

This is a larger version of my 28ft Gypsy sailing catamaran and is a 34′ offshore cruiser. It has essentially the same cuddy as Gypsy as that has proven a comfortable size for a couple and occasional guests.

This is an ultra efficient, modern folding trimaran design with advanced features not found elsewhere.

Dixi Dinghy plywood 3:1 dinghy

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.

A 35' centerboard cruising boat designed for long-distance cruising and living aboard. Simplicity’s raised deck and 11’ beam result in a spacious interior, with standing headroom throughout. Construction is plywood over plywood bulkheads and frames.

The Sponge Docks Skiffs are designed for first-time builders, due to their simple stitch and glue assembly, yet on the water these good looking boats are versatile, stable and dry.

The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82″.