Plans & Kits

Didi 38 radius chine plywood cruiser/racer

Build the Babson 14 from scratch! Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.Plans contain 16 sheets of drawings, full-sized mold patterns so no lofting is required (no offsets are included with the plans)

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq. ft.

Lofting is required.

BUILD FROM PLANS AND FULL SIZE PATTERNS IN WOOD / EPOXY

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a car.

The success of the proven Chesapeake™ hull shape led quickly to demands for similar tandem and three-person designs. The Chesapeake Double™ and Triple™ are high-volume touring boats, with a 700lb payload that belies their surprising speed.

The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.

Beautiful 8 ft mahogany runabout with electric power. Great for children but will accommodate adult(s).

A small river ferry has been designed to transfer up to 60 passengers.

The design is a catamaran of marine plywood construction using fibreglass/epoxy to connect the seems.

The design is using the torqeedo electric motor concept using power dense lithium ion batteries.

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).