Plans & Kits

Here is another little skiff inspired by a Chesapeake Bay working craft.

Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.

Safe, dry, fast, and seaworthy V-bottomed inboard powerboat designed for carvel planking.

Construction: Carvel planked over sawn frames.

Alternative construction: Strip

Lofting is required.

Propulsion: 6 cylinder 350 cubic inboard.

Plans include 6 sheets.

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.

The Mill Creek 16.5™ is enormously popular because it can be used in so many ways. Not only can you paddle it as a single or a double, but you can sail it, or add a sliding-seat rowing unit.

We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders.

We included in our catalog this boat for a request of one of our customers who identified in this model the traditional American boat, whose designs were published in WoodenBoat magazine, with the strange name “Dispro”, which meant the “Disappearing propeller boat”.

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p

Kingfisher’s shape was inspired by famous Chestnut Prospector. Hull width of 93cm, flat bottom and slim shape gives good stability and maneuverability. It is designed for crew of 2 with additional equipment (tents, fishing rods…).

The “gozzo” is a traditional Italian fishing boat still very popular. With a length of 4 m our GOZZO 400 has the minimum size which allows to maintain all the advantages connected to this type of