If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A serious extended expedition touring kayak, double or triple, designed to carry a large load safely and with ample stability.
4.80 m Plywood stitch & glue touring canoe. Only two plywood sheets are needed!
A simple and seaworthy V-bottomed centerboard cruiser with accommodations for two.
Construction: Plywood planking over sawn frames
Lofting is required
Plans include 10 sheets.
The length of the American Whitehall of the 19th century was between 13′ and 23′. 16′ was the most typical length and the boats were built for 2 or 3 rowers.
Her 6′ 11″ beam makes for a big 15-footer. Cold-molded, lightweight and trailerable. Construction: Cold-molded. Alternative construction: Carvel, lapstrake or strip. No lofting is required. Plans include 6 sheets.
Shorter but more burdensome than our popular 12′ Acorn, this little gem will be slower but more versitile.Her glued-lapstrake hull can be planked up from unscarfed 8″ plywood sheets.Construction: Glued lapstrake plywood.Alternative construction: Traditional lapstrake.No lofting required.Plans inc
Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped
This boat is happy playing near the beach, on portages or off on a two week canoe trip.
Cutter designed by William Fife Jr., in 1888.The plans produce a model that is 28″ in length.You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift, as well as template for you to shape the profile.
This runabout reveals the influence of Zimmer’s association with John Hacker, and will require expert boatbuilders.Construction: Batten-seam planking over sawn frames.Lofting is required.Plans include 4 sheets.
One of a couple dozen built in the 1970’s. Featured in Fourth Book of Good Boats.
Lapstrake dory/skiff built by the WoodenBoat School in Brooklin, Maine in 2021 as a class project
Length: 18 feet, Beam: 8.25 feet, draft: about 1 foot.
