Plans & Kits

17'
Plan #400-141

As much functional sculpture as sea kayak, the Arctic Hawk™ could be the most refined stitch-and-glue watercraft anywhere in the world.

Stitch & Glue Night Heron is at home out on the open water and exploring the shores of distant islands.

This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.

Shallow-drafted V-bottomed cruiser with cross-planked bottom & berths for three. Construction: Carvel planked sides over sawn frames; cross planked bottom. Alternative: Strip-planked topsides. Lofting is required. Plans include 7 sheets.

Good dories have a reputation for being difficult to design but easy to build. Iain Oughtred has taken care of the hard work here-you can’t go wrong with his detailed plans for this lapstrake (plywood) Swampscott derivative.Construction: Glued lapstrake plywood over sawn frames.Alternative constr

Our Skerry™ is that rare boat combining excellent rowing and sailing qualities into one attractive craft. Sail when there's wind, row when there's not. You'll cover the miles either way.

24′ Chesapeake Bay Hampton FlattieL.O.A.: 24′ 2″L.W.L.: 22′ 8″Beam: 7′ 9″ Draft: 2′ ½″/3′ 9″Sail Area: 263 sq ftWeight: 2,500# (approx)Proportionately, this is the largest sharpie type known, and shows the maximum beam ratio successfully used in the sharpie type.

Cutter designed by Edward Burgess in 1887, and the inspiration for the 40′ class.The plans produce a model that is 22″ long.You’ll receive 3 pages of plans, historical information about the boat, step-by-step instructions and full-sized patterns for each lift, as well as template for you to shape

Here is a fine little working type punt that feels at home in the marshlands, as well as the open bay waters.She is 14′-9″ long and was designed around a working load, with a draft of about 3″.