If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Construction - Glued lapstrake clinker plywood.
No Lofting required.
Plans include 5 sheets with instructions.
Sail Area - 60 sq. ft.
Norwegian-influenced rowing/sailing craft designed for glued-lap plywood construction.
Constuction: Glued lapstrake plywood
No lofting is required.
Plans include 8 sheets.
With a length of 6′-6″ (2m) “Dingo” is our shortest boat weighing only 28lb (13kg). Easy to car top, easy to take to the water and back, easy to launch from the mothership without breaking your back. With a beam of 4′ (1.20m) the boat is stable enough to stand up in.
Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.
Thurlow provides you with three different construction alternatives: wood-strip planking, with frames; woodstrip frameless planking covered with fiberglass; and wood-canvas construction.
Construction: Wood-canvas, wood-strip-plank or wood-strip fiberglass
Austral’s design is an outgrowth of my 26' Wynfall design, intended to provide additional space below decks, including standing headroom. She is slightly heavier, longer and wider, and has more freeboard than her smaller sister.
This design has the same nice interior space layout as Badger, with the addition of quarter berths aft. For a family of four to live aboard, as has been done on one of the sisterships, this provides good separation of the sleeping spaces.
This beautiful 11′ 2″ dinghy is similar in construction to the Nutshell Pram, although it is slightly larger, with a pointed bow.Construction: Glued-lapstrake plywood.Alternative construction: Traditional lapstrake.No lofting is required.Plans include 5 sheets.
The plan has been designed according to the regulations of the class “10 feet”. So was born a simple, light and very fast plan.Start 30 has a double life.
Lapstrake-plywood daysailer with a shapely wineglass transom, unstayed sprit rig, and wide, flat, keels for easy trailering.
Construction: Lapstrake plywood planking over steam bent frames.
Alternative construction: Cold-molded or strip.
No lofting is required.
“Sea Fever” is a true classic designed by Ben Seaborn and built by Vic Franck in 1956.
The CHIEF UNCAS is a classic, electric-powered boat built by the Electric Launch Company (ELCO) i
