Sailboats - Daysailers
Exploration Ketch Tern
Tern is a lengthened (to 23'9') version of my earlier 20' design Ratty.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Tern is a lengthened (to 23'9') version of my earlier 20' design Ratty.
Construction - Glued lapstrake clinker plywood. No Lofting required. Plans include 7 sheets with photocopies of Classic Boat building series. Sail Area - 67 sq. ft.
Sandy is a husky centerboard cutter designed for extended coastal cruising in such areas as the east coasts of the U.S. or Australia, the Pacific Northwest, or Europe.
The Eureka is a pretty, simple to build plywood canoe built in stitch and glue, (44lbs down to 34) and paddles nicely. Very comprehensive plans - a boatbuilding course in a book.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.
The Solo Packette is designed for those searching for pack canoe that they can carry to even through the most difficult approaches.
Lapstrake is a forgiving building method. The overlapping spruce planks allow for a little error when installing, which gives the classic canoe an extra layer of peace of mind when you’re on the water.
Carvel-planked, outside ballasted cruiser with choice of three or four berths.
Construction: Carvel planked over steamed frames
Alternative construction: Cold-molded or strip
Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq. ft.
Lofting is required.
A small daysailer/cruiser with berths for two. Construction: Plywood planking over sawn frames. Lofting is required. Plans include 8 sheets.
Nautilus is one of the best surviving examples of Ben Seaborn's design and the Blanchard Yard's c
Custom built Bar Tender with barrel back, carbon fibre bottom, mahogany through out, custom inter