Oar / Paddle
RoofRack
A small and very simple tender to fit inside a station wagon or on a roofrack, this little plywood dink will suit some one wanting a tender for their small yacht or motorboat.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A small and very simple tender to fit inside a station wagon or on a roofrack, this little plywood dink will suit some one wanting a tender for their small yacht or motorboat.
SIRENETTA is a mini kayak conceived for young people, but it may be used also by adults. The flat bottom and the reasonably large beam make it safe and suitable for beginner canoeists.
A 10 ft. traditional lapstrake-planked Norwegian style pram. Strikingly elegant but very practical rowing tender.
This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.
Come experience the nuances of this East Greenland design.
The Ammassalik 176 is a true representations of the East Greenland design.
Our best seller the 13 1/2 foot Bullet by Switzer. Iconic lines, the Bullet was a marathon and record breaker in its time.
Bedard Yacht Design’s Ozona X Nesting Pram evolved from the hugely popular Ozona Pram and a significant demand from cruisers for a nesting dinghy, slightly larger.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.
This is a simple 8ft stitch and glue sail/row pram. It requires only 3 sheets of marine plywood and should be very fast, easy, and inexpensive to build. It should end up just over 80lb so easy to transport as well.
Roberts SPRAY 22 trailerable cruising sailboat you can build in wood epoxy using the plans and full size frame patterns.
PLEASE save our 94 year old Mother's beloved sailboat from the burn pile!
Iconic Spanish Cedar rowing shell for oarsman / oarswoman weighing up to 175 lbs is 25'-9" length
MORNING SONG is the sistership to Lin and Larry Pardey's TALEISIN and was meticulously built by K