Plans & Kits

Shoal-draft ocean voyager

This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length.

Light and fast, a 20' tortured plywood, decked dayboat: both a double kayak and a single scull in one hull. Her 'midship' section is similar to Aleut kayaks.

Construction - Glued lapstrake plywood.

Alternative construction - Traditional, cold-molded and strip plank.

No Lofting required.

Plans include 8 sheets.

Sail Area - Lug 87 sq. ft.

Sloop 104 sq. ft.

Yawl 121 sq. ft.

Designed for a boat owner who wanted a rigid tender for his 24’ meter yacht, PRAM 220 has the minimum dimensions to be used at this scope. It may be used by children for sailing in protected waters.

ZEN is a very simple 10 Foot boat (www.diecipiedi.it) particularly narrow and therefore unstable. It is not the right boat for a beginner but, in the hands of a good helmsman, it may be fast.

The Sparrow Hawk is proportionally downsized for the smaller paddler.

Our version of the Optimist Pram, the "Club Racer"

The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing.

Cutter designed by William Fife Jr., in 1888.The plans produce a model that is 28″ in length.You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift, as well as template for you to shape the profile.