Newport Runabout
This runabout reveals the influence of Zimmer’s association with John Hacker, and will require expert boatbuilders.Construction: Batten-seam planking over sawn frames.Lofting is required.Plans include 4 sheets.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
This runabout reveals the influence of Zimmer’s association with John Hacker, and will require expert boatbuilders.Construction: Batten-seam planking over sawn frames.Lofting is required.Plans include 4 sheets.
You can enjoy paddling easier and funnier with less budget because it’s made of plywood, sectional and you can build one in a week.
A 35' centerboard cruising boat designed for long-distance cruising and living aboard. Simplicity’s raised deck and 11’ beam result in a spacious interior, with standing headroom throughout. Construction is plywood over plywood bulkheads and frames.
If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m, (even better if it exceeded 15 m).
SILVER 45 is a very classical small runabout capable of planing at full charge with a 25 to 40 HP outboard engine.
ROBERTS SPRAY 27 TRAILERABLE CRUISER You can build this boat in wood epoxy and other materials too.
Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped
The Venture has a perky feel with a springier sheer line, compact length and the upright bow.
This double-ended sloop combines genuine tradition and modern performance.
Construction: Glued-lapstrake plywood over laminated frames.
Lofting is required.
Plans include 4 sheets.
4.80 m Plywood stitch & glue touring canoe. Only two plywood sheets are needed!
Built in Denmark (1930s-40s ?) Eric Salander design. Restoration Project.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.