This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here.
(All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
With a design by Sam Devlin, owner Dan Taylor built this stitch and glue cruiser out of Okumo plywood. The cabin is finished with Doug fir and Alaskan yellow cedar. It took just over two years to complete with help from family and friends.
Doyle Herman started restoration of this 15' Wagemaker in September of 2001. He launched it in May 2002. He stripped the boat to a bare hull, replaced the deck plywood and part of the transom. Wolverine Boats of Grand Rapids, MI built the boat in 1957.
Jim Maas designed and built this 17'6" flat-bottomed skiff. Launched in the summer of 2001, it is the fourth boat he has built. He boats mostly in the Chesapeake Bay and Delaware River, but spent some of the summer at Lake Newboro, Ontario, where he says that wooden guide boats are not uncommon.
Bill Burgess built NELL to sail on Hoods Pond in Topsfield, Massachusetts and the waters of Kittery Point, Maine. Launched in September 2000, she is strip-built with 1/4" northern white cedar cove and bead strips, and covered with fiberglassed epoxy.
Norwegian sailing pram traditionally built of spruce and oak painted with linseed oil paint. The spars and oars are varnished and made of pine and the sail is made of cotton.
The boat is a lot of fun to sail and it rows beautifully too.
This is my new launch Cirrus Greenland style kayak - 17′ 2″, 43lbs — stitch and glue mahogany and ribbed poplar with cherry and Spanish cedar accents, blackened epoxy seams, strengthened with carbon fiber in high stress inner deck and hull areas, and has rare earth magnetically sealed hatches fo
Newfound Woodworks of Bristol, New Hampshire was the source for this Adirondack Guide Boat kit built by Michael Cruden of Ballston Spa, New York.
Joe Vines designed and built this small skiff that he calls SCOUT. She is propelled by a small trolling motor or a paddle. Joe launched her in June 2011, and paddles her on Orange Lake and Lake Lochloosa in Citra, Florida.
“Inspired by Mathew Murphy’s article, ‘A Solo Canoe for Double Paddle’ (Small Boats 2007), a 10′6″ version of Harry Bryan’s Fiddlehead is now being paddled around the bays and beaches of the Bucklands Peninsula” in New Zealand, writes Tony Hinde.
With a submerged clipper bow and high tucked transom, Kayleigh is every inch a classic powe
Lapstrake, Atlantic white cedar, oak ribs, mahogany thwarts transom, ceder floor boards, spruce m
Mike died before he could complete the boat. Cold-molded, 90% complete.
