Launchings

Surfing kayak.

Paul Edgar sent these pictures of his recently launched MINOQUA, a 22′ Princess sharpie from B & B Yacht Designs.

Jericho Bay Lobster Skiff.
I added 6″ to the design for a length of 16′.
I also lowered the sheer by 4 inches up forward for more ease in boarding from the beach.
25 H.P. 4-stroke Tohatsu pushes the boat to 26 mph with one person.

This is a Carolina Dory, designed by Jeff Spira (International) Boats. Built with (mostly) materials from the local Lowe’s/Home Depot store. Exterior hull is 1/2″ exterior plywood covered with 6 ounce fiber glass cloth and about 6 coats of MAS Epoxy. Very easy plans to follow...

S/Y ELISE is a custom build boat to fit our customers needs. She is a replica of French boat from Victorian era, design #203 by Paul Gartside Designs. Her hull was build at the Ekami Woodenboat Building School, Hamina, Finland but due to unfortunately issues she was never completed there.

Driftwood’s hull is constructed of marine mahogany covered by fibreglass. The keel, stem, gunwales, benches, and spray rails are made from Sapele. It’s a Candlefish 13 Devlin Design that uses the stitch and glue construction method.

I built this Nutshell pram in the strip method of construction for my two daughters to learn to sail and row, hence the name “Double Trouble”. I have yet to add the mast for the sail rig, but we managed to put it in the water for rowing this past week.

Pintail is a 25′ Chesapeake Bay draketail built by participants in the Chesapeake Bay Maritime Museum’s Apprentice for a Day Program in St. Michaels, Md.

The build was started in 2009 by Dr. David Likely of Dorn Ridge N.B. After his passing in late 2012, the task of completing the build was taken on by Dale Murray and Ann Fillmore. Work has been ongoing since the fall of 2013.

Bob Sack of Covesville, Virginia, built this Catspaw Dinghy model using plans and an instruction book from the WoodenBoat