Launchings

Having built many mono hull boats thought it time to try a catamaran as they say 2 is better than one.

Having made a 25lb canoe previously, I wanted to play with how light I could go for my next canoe. My research made me think I could get down to around 15 pounds for a 12' canoe so I decided to go for it.

Eric Bishop designed and built this rowing dinghy, THE MISS LINDA, from 3/8″ plywood on black oak frames, fastened with copper rivets. He launched her on March 7, 2012 in Morro Bay, California. You can reach Eric at javazone@tcsn.net 

Emmanuel Alassoeur built this 14′ Périssoire from plans by François Sergent that appeared in 1944 in his book called Construction of Canoes and Kayaks. Emmanuel spent about four months building the hull, planking her with red cedar and building the deck from plywood.

Kevin Moroney of Cape Coral, Florida, was building an 18′ modified sharpie skiff when his grandson, Colin, was born in Denver, Colorado, last year.

Built at The Nautical Arts Workshop. Quarter inch Okoume plywood was used for the lapstrake planking. The transom, gunwale and seats are made of cherry. The paint is from George Kirby.

I built this boat from a kit purchased from Chesapeake Light Craft. I have built 4 wood strip boats previously. I built a kayak, a canoe, a row boat and a sail boat. My saying is “never build your last boat”.

This is my Doug Hylan designed Point Comfort 18, built and launched in Dartmouth, Nova Scotia. It’s glass over marine ply to the designer spec with numerous interior changes including solid inwales, a center console , and exotic hardwood fore deck.

Jenny is a 17LT from CLC Boats designed by Nick Schade built by Andy Welsh.

When his grandchild Eden was born, Stan Swan started building her an Original Gloucester Rocker. After several more months than he anticipated, he finally finished it and presented it to one-year-old Eden on July 10th this year.