Sailboats - Daysailers
Skerrieskiff 17'
Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.
An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.
Construction: Cross-planked bottom, lapstrake sides
Alternative construction: Plywood or glued-lapstrake plywood
Lofting is required
The Lorna has a slim sweet hull for experienced paddlers.
Pathfinder is a big, classic, stable daysailer with space on board to set out two airbeds and sleeping bags on a flat floor, designed for home boatbuilders she is an exceptional performer under sail.
A big, healthy, open skiff with sophisticated lines. Construction: Strip planking over sawn frames; double diagonal bottom. Alternative construction: Plywood lapstrake topsides. Lofting is required. Plans include 6 sheets
V-bottomed single shell with sliding seat, outriggers and light plywood construction.
Construction: Plywood planking over bulkhead-type frames.
No lofting is required.
Plans include 4 sheets.
Classic sport fishing boat in the style of the Abaco boats. A classic, smooth riding, variable deadrise hull finishing with 17 degrees deadrise at the transom.
Cape Henry 21 lapstrake plywood trailer sailer
This boat, with a LOA of 8 mt,develops an internal volume such as to allow 6 crew members a sailing cruise.The hull lines and deck lines are to corner for simplicity of construction, and are harmonized with the hull volume.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).