If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
VOYAGER 600
CRUISING SAILBOAT WOOD EPOXY boat plans & FSP
The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.
Rugged, simple, stable, and economical to build, the Lumber Yard skiffs are based on traditional New England flat bottom work skiffs.
The boat is nice to row - a good combination of tippy enough for an intermediate, yet after a few days a novice will get the hang of it.
V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 11 sheets.Please note: gaff rig version’s mast measurements are taken by scaling from the plans.Notice the below de
Fast / Lightweight / Easy-to-BuildSpecifications:
This design has the same nice interior space layout as Badger, with the addition of quarter berths aft. For a family of four to live aboard, as has been done on one of the sisterships, this provides good separation of the sleeping spaces.
Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.The plans produce a model that is 25″ long.You’ll receive 4 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.There are
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
This small dinghy can be used for fishing, pleasure rowing or as a tender for a bigger yacht. It can also be fitted with a small outboard motor. The boat has a relatively high freeboard and can take a fair amount of load. It handles very well small waves or wake caused by powerboats.
WoodenBoat School student build 2024. All construction and fiberglass work completed.
The Headwater Fourteen [H-14] was designed and the prototype built in the Summer of 1
