Plans & Kits

An inshore skiff for sails, oars, or electric propulsion.

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of Hal Kelly.Mia

Glued-lap plywood rowing or sailing tender with plenty of capacity. Construction: Glued lapstrake plywood. No lofting required. Plans include 5 sheets.

Construction: Strip planked and glass/epoxy sheathed.

Alternative construction: Cold molded, traditional wood and canvas lapstrake plywood.

No Lofting required.

Plans include 4 sheets.

Easy To Build | Cartoppable | Build With The FamilySpecifications:

• LOA 9′ 6″
• LWL 8' Beam 49″
• Draft 3″
• Depth amidships 17 1/2″
• Power 6 hp outboard

With a length of 6′-6″ (2m) “Dingo” is our shortest boat weighing only 28lb (13kg). Easy to car top, easy to take to the water and back, easy to launch from the mothership without breaking your back. With a beam of 4′ (1.20m) the boat is stable enough to stand up in.

Based on the Donzi Sweet 16, this little treasure boasts a generous deep V at the transom allowing for smoother running and bad weather handling.

Silver Thread is a replica of a Cornish lug and mizzen used in the inshore fishing and as tender to larger vessels within harbors. The original boat, Summer Haze, was built in Padstow around 1908.

Light, lapstrake-planked open canoe for sailing or double-paddling. Construction: Lapstrake planking over steamed frames. Lofting is required. Plans include 4 sheets.

The Sea Island Sport is CLC’s response to hundreds of requests for an attractive stitch-and-glue sit-on-top kayak. Credit for the design goes to Nick Schade.