If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
This exquisite launch leaves little wake at five knots. Her plans show both cold-molded and plank-on-frame construction. Construction: Cold-Molded or Carvel planked over steamed frames. Alternative construction: Lapstrake. Lofting is required. Plans include 5 sheets.
A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.
Construction Method: Carvel planked over steamed frames
Alternative construction: Cold-molded or strip
Lofting is required
Plans include 4 sheets.
Riva’s only outboard designed in the early 50’s with a 25hp Evinrude. Some 140 models were built between 1950 and 1957. We have been fortunate enough to have received a good set of plans that cover all details enabling us to replicate this little treasure.
Based on the Donzi Sweet 16, this little treasure boasts a generous deep V at the transom allowing for smoother running and bad weather handling.
Harbor Woodworks offers custom kits and boats, tailored to your specifications and level of completion. We ship to the U.S. and Canada.Some of John’s description follows --“There has been a lot of enquiry for a “bigger Navigator”.
The Eureka is a pretty, simple to build plywood canoe built in stitch and glue, (44lbs down to 34) and paddles nicely. Very comprehensive plans - a boatbuilding course in a book.
Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.This design differs from those of the period in that it is to be constructed in the 'Instant Boat' method using glass fiber and polyester or epoxy resins to make
"While Aweigh" is an 18' 6" Port Townsend Skiff, lovingly built and cared for, a head-turner on e
Master craftsman glued 1 “ strips over form, epoxied, varnished this strong but lightweight 50 lb
Willow, a 25 ft strip planked sloop, is the third sailboat designed and built by Matt Greytak, af
