If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Strip Planking red cedar building, boat with skill : light, carrellable, fashion lines.
Catamaran, 13 foot by 6+ foot wide. Wooden design using 1/4 ply and fiberglass covered. Single sailing Rig or optional Bi plane rig. Optional Cabin.
The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
Construction: Strip planked and glass/epoxy sheathed.
Alternative construction: Cold molded, traditional wood and canvas lapstrake plywood.
No Lofting required.
Plans include 4 sheets.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.
The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage is available up forward below the casting deck.
Beamy yet fine-lined rowing/sailing boat designed for lightweight construction.
Construction: Cold-molded.
Lofting is optional.
Plans include 5 sheets.
Cradle Boat Baby Tender II, for the newborn sailor.
Cutter designed by Edward Burgess in 1887, and the inspiration for the 40′ class.The plans produce a model that is 22″ long.You’ll receive 3 pages of plans, historical information about the boat, step-by-step instructions and full-sized patterns for each lift, as well as template for you to shape
The Clyde one-design 20-tonners as they were known were very popular and described by the Yacht Racing on the Clyde review of 1899 as "able and comfortable at sea, fairly speedy on the race course...
Located in Mystic, Connecticut - 3 staterooms and salon with A/C units, sleeps 8 - well maintaine
Wood hull built with meticulous and painstaking detail from a kit using a "stich-and-glue" method
