Plans & Kits

Shoal-draft ocean voyager

Cape Henry 21 lapstrake plywood trailer sailer

Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.

Speed, good looks, and comfortable seating were the designer's main criteria for this double-ended centerboard daysailer.

Construction: Cold-molded over strip-planked inner skin.

Alternative construction: Strip, carvel planked (transom stern).

Lofting is required.

A stable (28 1/2″ beam) strip-built touring kayak.

Planked up with 1/4″ cedar strips.

Construction: Strip planked.

Lofting is required.

Plans include 4 sheets.

Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.

The Berry Point 26 was designed to fulfill a need for a traditionally stylish, trailerable, moderately fast, and capable family cruiser. She had to be shallow draft, economical to operate and simple.

This is a boat simple to build, economical to use and that has a minimum of habitability and a lot of deck space for outdoor living.The construction method is the “stitch and paste” because of its small size.The hull is in CPM 10 mm thk.

A 10' Flat Bottom Powerboat/Rowboat

A serious extended expedition touring kayak, double or triple, designed to carry a large load safely and with ample stability.